Below is the V-Racer Hoverbike motion profile that should be utilized for all hoverbikes. Only Pitch and Roll will work for motion platforms. Speed is available for Wind Kits.
IMPORTANT: The telemetry for Pitch, Yaw, Sway, Heave, and Traction Loss are bugged and do not work properly. The values for these axes do not match what the game is doing and therefore have been disabled.
ATTENTION: You will need the Sim Racing Studio version 2.24.0.20 or higher to play V-Racer Hoverbike. You can download the latest version of SRS from here.
Platform Tuning
This motion profile was created on a PT Actuator 6DOF Simracing Platform (150mm: 7 Actuators (2 Front + 2 Rear + 2 TL + Surge). Since all motion platforms can be slightly different, please use the guidance below or utilize the quick tuning guide here for quick adjustments or the full guide here for detailed tuning information.
4 Vertical Actuator Tuning
Sway, Surge, and Traction Loss is converted into pitch or roll for platforms that do not have horizontal actuators. Since these motion profiles were created on a platform with horizontal actuators, the tuning(s) could result in excessive pitch or roll on platforms without horizontal actuators. IMPORTANT: For an axis that does not have a dedicated horizontal actuator, it might be necessary to reduce the Effect Slider for Lat G Sway, Long G Surge Accel and Long G Surge Decel, or Traction Loss by 60% to mitigate excessive movement. For example:
If no Sway actuators, reduce the Sway Effect Slider from 14 to 6.
If no Surge actuator, reduce the Long G Surge Accel/Decel Effect Slider from 16 to 6.
If no Traction Loss actuator, reduce the Traction Loss Effect Slider from 18 to 7.
Actuator Size and Mounting
These motion profiles were created on a platform with 150mm actuators with the Front to Rear Vertical Actuator spacing at 1150mm and the Left to Right Vertical Actuator spacing at 745mm. Actuators placed closer together or are larger than 150mm will increase the angle of pitch and roll. To mitigate the increase of motion if needed, reduce the Effect Slider for the impacted effects or reduce the Max Angle.
MDBOX Tuning
Due to built in smoothing effects for MDBOX, it may be necessary to reduce the Effect Smoothing by 50%. Surge, Sway, and Traction Loss may require Effect Smoothing to be removed completely.
Max Angle
These motion profiles have balanced to allow for the increase of Max Angle and Max Horizontal to 100 (unless noted otherwise). This will allow for the maximum movement capabilities of the vertical actuators. However, if less motion is desired, reduction of the Max Angle will reduce overall motion while still retaining the balanced effects.
Reverse Surge
These motion profiles were created with the surge actuator reversed. This will cause the platform to move forward when accelerating and backwards when decelerating. To reverse the surge actuator, please follow the tutorial here.
Auto Smoothing Low Speed
If pit stops or hard braking to a complete stop are too jarring, enable Auto Smoothing Low Speed. These motion profiles were tuned to not require Auto Smoothing Low Speed. Review the Auto Smoothing Low Speed section in the SRS Motion Tuning Guide here on how to enable.
~Donations~
I do all this for free and love it! However, If you would like to make a donation, please use the link here. Thank you!
V-Racer Hoverbike General Motion Profile
Notes: This profile has disabled Pitch, Yaw, Sway, Heave and Traction Loss due to buggy telemetry. Only Roll and Surge axis will provide movement. Gear Smoothing Factor does not appear to have any effect as well. If gear shifting is too harsh, reduce the Effect Sliders for Surge.
Change Log
Reserved