F1 2020 / DOF Reality

ATTENTION: This motion profile was created on a DOF Reality platform that did not have the SFU gear box upgrade. If you have a SFU upgraded DOF Reality platform, you will likely need to adjust the Effects Slider and Smoothing Effect settings.

Below are the motion profiles for F1 2020. The F1 profile should be utilized for F1 race cars and the F2 for the F2 race cars. Classic F1 will be dependent upon the year of the race car, please utilize the F1 profile for higher horsepower/performance race cars.

IMPORTANT NOTE ON SWAY

F1 2020 has extremely low values for sway telemetry compared to other racing titles. This might result in jarring motion on some tracks. Max Telemetry has been set to 4, but if additional smoothing is desired, the SRS config.ini file value for sway curving can be adjusted. Change the default setting of: sway_curving_factor = 1 to sway_curving_factor = 2 NOTE: This will impact ALL tunings within SRS. This tuning was created utilizing the default curving factor of 1. Tuned on a DOF Reality P6, but will work for all DOF Reality models. For more information on tuning, see the SRS 2.0 Motion Tuning Guide here.

~Donations~

I do all this for free and love it! However, If you would like to make a donation, please use the link here. Thank you!

F1 / General Tuning

Notes: Tuned utilizing telemetry only from F1 race cars on Spa, Suzuka, and other various tracks. Surge effect slider balanced to account for higher braking performance.

F2 Tuning

Notes: Tuned utilizing telemetry only from F2 race cars on various tracks.