Below is the TensionR Active Belt profiles for Microsoft Flight Simulator. This belt profile can be utilized for all aircraft.
Reversing Belt Direction
The standard setting for the TensionR Active Belt is for the RIGHT belt to tighten when turning LEFT which is what is utilized in the profiles below. To change this setting so the LEFT belt will tighten when tuning LEFT, turn the Reverse button to ON for Sway.
Body Position During Calibration
Your positioning in the seat during calibration can impact the feel of the TensionR Active Belt. In order to have a consistent feel in tension from the belts, you should always use the same position and pressure when sitting back against the seat during Calibration. A relaxed normal driving position with the belts it recommended. If your back is not pressed against the seat during calibration, the belts might have additional slack that will cause the belt profile to feel looser than normal. In addition, if your back is pressed extremely hard against the seat during calibration, the belts might feel tighter than normal.
For additional guidance on tuning the TensionR Active Belt, please use the Belt Tuning guide here.
Microsoft Flight Simulator motion profiles can be found here.
~Donations~
I do all this for free and love it! However, If you would like to make a donation, please use the link here. Thank you!
Microsoft Flight Simulator General TensionR Profile
Includes: All aircraft
Change Log
Reserved